How it Works

1. The Original SOIL MIXER comes pre assembled, just attach the hopper unit and the 2 bolts for the support legs.
2. The dosmatic fertalizer injector is pre installed on The Original SOIL MIXER
3. Position soil mixer above potting table or flatfiller.
4. Adjust the height if necessary.
5. Attach the water intake to the fertalizer injector and the outtake to the soil mixer control.
6. Add up to 3.8 cubic feet of potting soil into the hopper.
7. Adjust the water feed rate to determine moisture in the soil The feed rate determins the amount of water.
8. Turn on the machine.
9. Load soil in hopper until all the soil has been taken through the auger, add additional soil if needed.
10. When the bench or flat filler is full turn off the soil mixer stop flow.
11. Clean up when finished.